Corrected existing furnace return ductwork and properly connected the return plenums to the furnace ducting. Relocated the upstairs ducting from the return ductwork to the supply side. Resealed the return ducts using new panning where the upstairs line was removed. Installed a dedicated electrical outlet for the condensate pump and verified proper pump operation. Upon confirming pump operation, found the condensate discharge line was not properly supported and contained multiple low spots where water was collecting. Installed proper hangers on the condensate line and confirmed correct drainage. Removed the old furnace from the basement. Verified the upstairs bedroom supply duct is delivering 108-degree heated air and confirmed tight, reliable seals at both the supply and return plenums. The system is operating properly at this time.
