Upon arrival customer had a dripping faucet, running toilet, and a fridge supply line that needed to be replaced. Tech adjuster fill valve to stop running I then removed the old copper supply line, increased the size of the hole, and ran a new braided supply line. Everything is holding well with no leaks present. Return visit needed to replace the faucet. Upon return visit customer had a faucet ready to be installed. I removed the pop up assembly on the drain and cleaned out the overflow. I then pulled out the sink since it was no sealed to the countertop. I removed the faucet and installed the customer supplied two handle delta faucet. I replaced the chrome supply lines with two breaded supply lines. I yesterday the faucet and there are no leaks present. Over the course of the service two issues came up. The trap was corroded and leaking and the shutoff for the cold water was completely seized up. Customer would like estimates sent for these along with the install of a lav sin
