Arrived on site for heating maintenance on 2019 Goodman furnace 1. Visually inspected condenser coil for debris/ dirty. 2. Inspected condenser fan motor. 3. Inspected condenser fan blades. 4. Inspected/ cleaned wiring connections. 5. Tested compressor/ condenser fan motor capacitor. 6. Checked compressor amp draw. 7. Checked condenser fan motor amp draw. 8. Inspected / replaced return filter. 9. Inspected return plenum for debris/ dirty. 10. Inspected evaporator coil. 11. Inspected blower motor/ blower wheel. 12. Checked blower amp draw. 13. Measured temperature differential from supply to return. 20 degrees measured. 14. Inspected drain lines and treated to prevent blockages 15. Tested pressure switch, igniter and flame sensors 16. Tested inducer motor and safety switches Found water around inducer motor indicating that there is water getting into the flue pipe. This could cause malfunctions and failure of furnace components. I thoroughly tested functionality and safety of furnace
