824 S Central Expressway, Suite 100
Anna, TX 75409
903-482-4900

Our Top Cities


Job Locations
for van alstyne, tx


Map of Van Alstyne TX
Shelby S.

Shelby S.


Job Checkin

Upon arrival homeowner stated that he had no concerns at this time but would like an estimate for duct cleaning. Preformed single system 2 zoned gas system cooling maintenance. We tested all electrical components on the inside unit, all tested within manufacturer specifications. We got a supply temp of 55 degrees coming out and a 75 degrees coming into he unit. Tested and treated drain line with total c. Client stated he did not need us to change his filters at this time. We proceeded outside to test all electrical components on the outdoor unit. All tested within manufacturer specifications. We tested start and run amps for the compressor and fan motors. The start amps on the compressor were testing on the high side of the range. The run amps for the compressor and fan motor were testing within manufacturer specifications. We rinsed the outdoor coil. We provided estimates for a hard start kit, quick blast valve and level one duct cleaning. Unit was cooling upon departure.

Upon arrival homeowner stated that he had no concerns at this time but would like an estimate for duct cleaning. Preformed single system 2 zoned gas system cooling maintenance. We tested all electrical components on the inside unit, all tested within manufacturer specifications. We got a supply temp of 55 degrees coming out and a 75 degrees coming into he unit. Tested and treated drain line with total c. Client stated he did not need us to change his filters at this time. We proceeded outside to test all electrical components on the outdoor unit. All tested within manufacturer specifications. We tested start and run amps for the compressor and fan motors. The start amps on the compressor were testing on the high side of the range. The run amps for the compressor and fan motor were testing within manufacturer specifications. We rinsed the outdoor coil. We provided estimates for a hard start kit, quick blast valve and level one duct cleaning. Unit was cooling upon departure.