Came out today for QC visit on new install. Started inside at t-stat (Ecobee) turned system on to check over unit. System is level all wiring is good no error codes. Measured 20 degree temp split. Found small air leaks around some of the supply ducts. I made sure to go over these ducts a second time with sealant. Drain line is draining at this time made slight adjustments to pitch of the drain. System is clean and operating as designed. Outside unit is level all electrical components are good and tight. All components are operating as designed. Pressures were within manufacturer specifications. Inspected filters as homeowner had work done in the house recently, found upstairs unit filter to be particularly dirty and replaced it. Found downstairs with a bit of dust bunnies but no major cause for concern, so I left it in place for now. I would recommend changing in a few months. Unit in good working order upon departure. Thank you for your time.
