Cooling Maintenances Performed- Upon arrival systems are working and operational. I began my maintenance at the outdoor condensers. I began by popping the top and washing the coil out with water and solution as well as removed debris. I then proceeded to inspect the electrical components for wear and tight connections. I measured amp draws and recorded refrigerant charge. I then proceeded to the indoor furnace units. I performed a duct leakage inspection on both systems. I checked electrical components for wear and tight connections. I flushed condensate lines. I measured temperature splits as well as static pressures. Filters have been checked at this time. Electrical amp draws have been recorded. Thermostats were inspected for proper operation. Upon departure systems are working and operational.