Preformed cooling maintenance on single system 2015. Tested all electrical components on the inside unit in attic above the office. All electrical components tested within manufacturer specifications range. The blower wheel is pulling high amps when running due to excessive dust and debris on the blower wheel its self. Temperature across the indoor coil was 79 return and 57 supply. I treated the main drain line with total c, rinsed off the reusable filter. I proceeded outside and checked all electrical components on the outside unit. All tested with manufacturer specifications range. The run amps tested within manufacturer specification range for the compressor and fan motor. The start amps for the compressor were testing above the manufacturer specifications range. I provided estimates for a blower wheel pull and clean to help bring the blower motor amps down. Also I provided an estimate for adding a hard start kit to the outdoor unit to her assist the compressor on start up and bring
