403 Headquarters Dr. Unit 5
Millersville, MD 21108
(443) 396-3797

Job Locations
for college park, md


Map of College Park MD
dennis@haasandsons.com

dennis@haasandsons.com


Job Checkin

The reason for today’s visit with the customer was to provide a solution on installation of a HVAC Heat pump and powering it up. Today when we arrived we saw a 150 amp GE Panel that had a few causes of concern. We saw that there were mismatched breakers in the panel such as three 30 amp two pole HomeLine breakers and an Eaton BR 30 amp two pole breaker. The panel also had breakers that were very loose and it did not have proper grounding to it. The service cable wrapped around the side/front of the home to an over head service and the service was provided by PepCo. After viewing the panel, the concern at the time was the wire feeding the old AC system. The HVAC tech from Buric stated the new system required a 60 amp rated wire with a 60 amp max breaker. After calling the technician, I found out the minimum for the system was 50 amps and the current set up that was installed would work fine. After finding this information, we then provided a solution on replacing current 50 amp breaker