Reason for today’s visit was to assess power loss to the pool equipment in the backyard. Put initial inspection I noticed that the pool equipment was ran off its own sub panel next to the motors and was very close to the ground and full of ants as well as completely rusted. I found no voltage inside the sub panel however there was voltage leaving the breaker at the main panel. I then noticed a spot on the ground where it appeared a tree had recently been. Customer stated the tree had fallen over so we had somebody come in and remove it and they use the stump grinder. This area was in direct line from the house to the sub panel and it appears as though they had ripped the wire out. To remedy issue we will need to run a new 30 amp 240 V line from the house through the attic over to the side of the house and then trench from the house out to the pool equipment. Because of the condition of the existing sub panel we would need to install a new one with a new platform for it to mount too so