Pride Plumbing was called out for no water from a well. Our inspection found that a hose clamp had deteriorated and fallen off a PVC outlet pipe and allowed the pipe to eventually be pushed off its fitting by the water pressure. We transitioned the pipe to PEX with stainless-steel fittings, tested for leaks, and corrected the issue. We also provided cost estimates to either 1) replace the well's 30/50 pump switch and gauge, charge the tank, and replace the well's submersible pump and wiring; 2) install a new submersible pump assembly (this would include replacing the pump, piping, wiring, tank tee, and well seal); or 3) replace the well tank, pump switch, pump gauge, and piping at the well head, charge the new well tank, and adjust the pump switch.