Pride Plumbing came out and provided a cost estimate to 1) repipe and replace the water supply lines under the house in the crawlspace, going to the fixtures in the kitchen (sink, dishwasher, and ice maker), the washing machine (installing new hot and cold boiler drains), and two bathrooms (sinks, toilets, and bathtubs/showers), with new PEX piping and fittings; and 2) repipe and replace the drain lines in the crawlspace, going to the fixtures in the kitchen (sink and dishwasher), the washing machine (installing a new washer box), and two bathrooms (sinks, toilets, and bathtubs/showers), with new PVC piping; installing new fittings and supports under the house for each fixture.
Pride Plumbing was called out for a water leak underneath the home. Our inspection found that the drain lines for the shower and washing machine had collapsed and were causing the leak. We provided a cost estimate to reconnect the sections of drain lines using multiple Fernco couplings and use joist hangars to rehang the piping and ensure that they had the correct amount of fall. We also provided another cost estimate to repipe and replace the drain lines in the crawlspace, going to all the fixtures in the home (kitchen, two bathrooms, and the washing machine), with new PVC piping; installing new fittings and supports under the house for each fixture.
Pride Plumbing came out and replaced a toilet with a new customer-supplied American Standard model. This included pulling the old toilet, repairing the flange with a Sioux Chief 886-MR stainless steel closet ring due to it being broken, replacing the toilet bowl, toilet tank, tank to bowl gasket and bolts, seat, wax ring gasket, toilet bowl bolts, toilet bowl bolt washers, toilet bowl bolt caps, and above-floor stainless steel braided water supply line.
Pride Plumbing came out and provided a cost estimate to replace an American Standard toilet with a new Gerber Viper pressure assist model. This would include inspecting/cleaning/replacing the flange, replacing the toilet bowl, toilet tank, flapper, water fill valve, tank to bowl gasket and bolts, seat, wax ring gasket, toilet bowl bolts, toilet bowl bolt washers, toilet bowl bolt caps, and above-floor stainless steel braided water supply line.
Pride Plumbing came out and provided a cost estimate to 1) connect the water and sewer lines to their customer supplied holding tanks; 2) after the water and sewer lines are installed, test for leaks and proper drainage; and 3) insulate the water line to keep it from freezing during cold weather.
Pride Plumbing was called out for sewage backing up into the home. Our inspection determined that the customer's septic tank was full. We provided a cost estimate to call in our septic pumping truck, uncover the septic tank, remove the lid, pump it out, clean the tank’s filter, ensure proper drainage and flushing, reset the lid, cover the tank back up, and install septic tank risers (so that the tank’s access covers are at ground level for better future access).
Pride Plumbing came out and performed the following work: 1) in the yard, dug down to the home's outside main sewer septic drain line; 2) cut out and removed a one-way PVC cleanout; 3) used a water pressure device and cleared a blockage in the drain line; 3) installed a new two-way PVC cleanout with a cap (connecting it to the outside main sewer septic drain line with new Fernco couplings); and 4) backfilled the hole we dug.
Pride Plumbing came out and provided cost estimates to 1) repipe and replace the water supply and drain lines in the crawlspace, going to all the fixtures in the home (the kitchen, two bathrooms (toilets, sinks, and bathtubs/showers), a washing machine, and a water heater), with new PEX and PVC piping respectively; installing new fittings and supports under the house for each fixture; and 2) dig a ditch from the house to the town sewer tap to expose and remove the outside main sewer septic drain line; install a new 4-inch PVC sewer drain line (connecting it to the main drain line under the home) along with proper cleanouts and fittings per code; install tracer wire in the ditch along with the new sewer drain line; and backfill, tamp, and spread grass seed and straw after the work has been inspected and approved by the county's Inspection Department.