The reason for today’s visit was the install two new customer supplied ceiling fans. After pulling down the two existing light fixtures we found that there was currently metal boxes rated for ceiling fans. Checked wiring in the switches and found it all the switches have been replaced as did all the wired in the home recently. All the devices were screwdown terminal connected as opposed to being backstabbed so no addressing was needed. Electrical panel was also replaced as was the service cable to the meter can and from the meter to The main panel. Panel in Home is a 100 amp Cutler hammer BR series panel. We installed the new fans in place of the old light fixtures and tested once installed. Both fixtures work properly.