Pride Plumbing was called out for no water pressure from a well. Our inspection determined that the well's submersible pump had gone out. We pulled out the well's black roll piping and submersible pump. Then, after preparing a new pump assembly, we inserted a new Goulds 10CS05422C submersible pump and black roll piping (with an attached torque arrestor and cable guards) back down into the well. Then we replaced the well's tank tee, 30/50 pump switch, pressure gauge, brass nipple, and wiring and used a heat shrink kit to reseal the well. The customer opted not to have us replace the pressure tank. We then opened an outside hose bib spigot and drained debris out of the water line, letting it run for several minutes.