Pride Plumbing came out and performed the following work: 1) disconnected the water and drain lines going to a Follett Symphony Plus ice and water dispenser and then removed it from its cabinet; 2) pulled the cabinet from its location and moved it out of the construction area; 3) relocated and reset the cabinet and then placed the ice machine back on top; 4) after the ice machine was in place, extended the water and drain lines over to the unit and made the proper connections; and 5) tested for leaks and proper operation of the ice machine upon completion of the work then cleaned up the work area.
Pride Plumbing came out and provided a cost estimate to perform the following work: 1) disconnect the water and drain lines going to a Follett Symphony Plus ice and water dispenser and then remove it from its cabinet; 2) pull the cabinet from its location and move it out of the construction area; 3) relocate and reset the cabinet and then place the ice machine back on top; 4) after the ice machine is in place, extend the water and drain lines over to the unit and make the proper connections; and 5) test for leaks and proper operation of the ice machine upon completion of the work then clean up the work area.
Pride Plumbing came out and provided a cost estimate to perform the following work: 1) cut and cap an existing sewer line going from the house to an existing septic tank; 2) reroute the home's existing drain plumbing outside to the side of the house; 3) dig a new ditch for a new sewer line from the house to a location in the yard; 4) install new tracer wire, 4-inch PVC piping and fittings, and 2-way cleanouts in the new sewer line ditch; 5) dig a 9'x9' hole at the end of the ditch in the yard, install a new E/One sewage pump system along with gravel as a base layer; 6) install 1-yard of concrete around the pump's basin after its tank has been inspected and approved; 7) leave the ditch open for an electrical contractor to install the wiring for the new pump; 8) dig another ditch from the new E/One pump system to the town's sewer tap and hook up to the town sewer tap using pressure pipe and fittings; 9) test the new pump and drain lines for working order; 10) backfill the ditches after t
Pride Plumbing came out and installed a replacement E/One sewage grinder pump and tested the unit to ensure it was working properly by filling the tank to the pump's set level and then letting the pump pump the water out.
Pride Plumbing was called out for an E/One sewage pump alarm going off. Our inspection found that the pump would not come on at all, only the alarm would. We pulled the pump and installed a temporary loaner pump. We waited and made sure that the loaner pump would pump the tank down before leaving. We took the non-working pump back to our shop to diagnose the issue. We also provided the homeowner a cost estimate to replace the pump.
Pride Plumbing came out and replaced a leaking outside hose bib spigot with a new Legend Valve 107-464 sillcock along with tying it into the existing main water supply line underneath the house with new PEX piping and fittings.
Pride Plumbing was called out to video-scan a drain line for issues. Our camera did not find any issues.
Pride Plumbing came out and removed a propane heater and several feet of gas supply line located on top of a canopy at a pickup window. We then capped the gas supply line on top of the building that ran to the canopy.
Pride Plumbing came out and bled the gas supply lines.
Pride Plumbing came out and repaired a couple of leaking shower valves.
Pride Plumbing came out and installed five bathroom sinks and their P-traps and drain lines; the shower valve, shower head, and faucet handles for a walk-in shower and two bathtub/showers; and three toilets and their braided water supply lines.
Pride Plumbing came out and installed a shower valve.
Pride Plumbing came out and installed several bathroom fixtures (two toilets and their braided water supply lines; a kitchen sink faucet and its drain and water supply lines; two bathroom sink faucets and their braided water supply and drain lines; and a shower head, valve, diverter, and faucet).
Pride Plumbing came out and repaired two heater gas line connections and reattach a hose that had come loose.
Pride Plumbing came out to install the gas supply lines for a series of outside gas heaters.