Pride Plumbing was called out for no water from a well. First, we removed the pressure switch's cover and checked for power. We found that there was power coming from the house, but it wasn't getting to the pump. After doing an inspection, we found that the pressure switch's points were stuck. We were able to free them and the well began working properly again. We also provided cost estimates to perform the following work: 1) replace the well’s jet pump, 30/50 pump switch and pressure gauge, and charge the tank; or 2) install a new submersible pump assembly (with an attached torque arrestor and cable guards) - this would include the pump, piping and fittings, wiring, tank tee, and a new well seal.