View visual findings from this job here - https://visionshare.xoi.io/?id=XA-15F7-FF49F016E7C24F0097B269CB47880F4A Customer would like to upgrade his second floor thermostat: * At arrival, remove the existing thermostat from the wall in the second floor hallway * Disconnected wiring from the existing thermostat and completely removed * installed and secured brand new Honeywell T4 thermostat level on wall * Wire in and secure low-voltage connections to new thermostat * Configure new thermostat and set program to the Customers request * Test system operations after the thermostat was installed- The circulator pump is on and running, and the switching relay is working properly, but water is not circulating in this zone * The customer states that this heating zone has not worked in over a year * The boiler is old and outdated and should be replaced- Old gate valves, Circulator pumps, Switching relays, Fan center and gas valve all original to the boiler * The customer agreed to the bleed