In the two guest bedrooms I ran a new 14-3 wire from the center of the room into the attic and down to the existing two gang switch box. I then installed a new dimmer and a in wall controller for a ceiling fan. Then I installed a fan brace box and wired customer supplied ceiling fans In the master bedroom i removed a surface mounted light fixture and installed a fan brace box and installed a customer supplied ceiling fan. I removed the dimmer switch it was on and installed a single pole light switch The fan was already a remote control In the garage I came out of a existing switch box in the attic and ran a new line done near the back window for a refrigerator. I also came out of that box and ran a line for a garage door opener For the fridge I fished down the wall into a old work box and installed a gfci For the garage door opener I installed a 1900 box with a gfci and a RS cover plate Customer had a lamp cord plugged in with a pull chain for a light fixture. I came out of a