Repairing cut wire to boat lift. Work is being completed tomorrow. WO-TNFR75347 Customer had pier redone. In doing so the line to the lift was pulled apart. We will pull the cut line coming from the house up onto a pylon and set a weatherproof junction box. We will then run a new 3/4 inch pvc run from the new junction box over to the boat lift and install a new weatherproof outlet for lifts to plug into. We will be returning tomorrow to complete work. 5/19 Returned today and completed work. I set a junction box above decking on a pylon 2 down from the lifts. I ran new liquid tight pipe under pier down to the lifts and set a quad box with 2 GFCI’s in it. Once completed we tested power and both lifts are working properly.