Pride Plumbing was called out for low water pressure from a well. Our inspection determined that the well's 110V submersible pump had gone out. We pulled out the well's black roll piping and submersible pump. Then, after preparing a new pump assembly, we inserted a new customer-supplied Countyline CLA201-13 240V submersible pump and black roll piping (with an attached torque arrestor and cable guards) back down into the well. Then we set the pressure tank's pressure, tested the pump, and used a heat shrink kit to reseal the well. We then opened an outside hose bib spigot and drained debris out of the water line, letting it run for several minutes.