Pride Plumbing was called out for a water leak at a water meter. We dug down and found that the union on the meter yoke was leaking, along with a nipple located between the meter yoke and the pressure-reducing valve (PRV). After shutting off the water, we removed and replaced the defective union and nipple and used PEX piping and fittings to replace a short section of the polybutylene main outside water supply line. We then turned the water back on and tested for leaks with no further issues. We also provided a cost estimate to trench a ditch from the water meter to the home and replace the black roll main outside water supply line with new black roll and PEX piping and fittings along with installing a new pressure reducing valve (PRV) and ball water shutoff valve at the water meter.