Pride Plumbing was called out for a basement sewage pump not working. We pulled and inspected the pump and found an object lodged in the unit's blades which had caused it to stop pumping. We cleared the object out of the pump, reinstalled it, replaced its float switch, tested the pump, and the issue was corrected. We provided a cost estimate to pull and replace the sewage grinder pump with a new Liberty model along with replacing its floats, check valve, ball valve, and union; wiring it up to its control panel; and making the appropriate drain, discharge and vent pipe connections. The customer also wanted us to inspect a basement ceiling because they thought they had a water leak. After gaining access into the ceiling, we did not find any leaks on either the water or drain lines.