Pride Plumbing was called out for low water pressure from a well. Our inspection determined that the well's Grundfos DX-8850 submersible pump had gone out. We pulled out the well's black roll piping and submersible pump. Then, after preparing a new pump assembly, we inserted a new Goulds M10422-01 submersible pump and black roll piping (with an attached torque arrestor and cable guards) back down into the well. Next, we replaced the well's outlet piping (with new PEX piping and fittings), tank tee, 30/50 pump switch, pressure gauge, brass nipple, and wiring and used a heat shrink kit to reseal the well. Finally, after turning the well back on, we opened an outside hose bib spigot and drained debris out of the water line, letting it run for several minutes.