Upon arrival, I found the breaker for the outdoor unit. I checked the compressor to ground and I ohmed it out. I inspected the wires for the compressor and found no exposed wire. I took a start amp reading and it it pulling 137 amps on start up before it trips. I unwired the compressor to see if the condenser fan motor would work. It did in fact work. I installed a hard start kit and got the start amps to 98amps, but it still tripped. I swapped the main breaker at the the panel to test if the breaker was bad. It still tripped, and this allowed me to determine that the compressor is bad. We will need to reach out to century in the morning to get an ETA for the compressor.