I arrived at our clients home for a 2 zone, single system cooling maintenance inspection. I began outside by checking and testing the electrical components to the condenser unit. The capacitor is beginning to fail and the contactor tested at 20 ohms, This is its maximum limit. The compressor was also starting at 153 amps. I then rinsed the outdoor coil from all the debris it had collected. Once washed the compressor started up at 94 amps. Still high but within range. I then went into the attic and treated the drain line. Measured the temperature drop and tested the blower motor. Everything passed inspection in the attic. I showed my findings to our client and we discussed adding a Hardstart kit to help keep the start amps in range and replacing the contactor on the outdoor unit to make sure it doesn’t fail in the middle of summer. He requested that we send an estimate and discuss the options with his wife. The unit is cooling on departure.