I removed two damaged receptacles. 1 in the hallway and 1 in the master bedroom and replaced them with tamper resistant receptacles. I spliced the appropriate wires together then pig tailed off the splice taking the single wire and wrapping it around the device screw then tightened the screw down. This is to ensure the best and safest possible connection throughout the circuit. I removed two surface mounted light fixtures in the hallway and the new work 8b box it was in and i install 2 6 inch led wafer recess lights. The other light i had to turn the 8b box into a junction box in the attic where i brought a Separate wire out of the box and tied it to the switch leg then put a plank plate on the box. I installed a dimmer switch in the hallway to control the lights I installed a customer supplied lamp post head to and existing lamp post During my inspection i noticed the devices in the home were a bit older and offered it give a solution to re device the home but the customer decl