Perform dryer vent cleaning on dryer and closet of first floor- Terminate through wall runs through garage and out of home: Disconnected power from dryer at arrival Pulled out and removed dryer from closet Found that there was no connection between the dryer and the vent piping- It was just pushed in Disconnected dryer vent piping for full access Brushed and blew out all dryer vent, cleaning from outside in and inside out vacuuming and blowing out 100% of debris Vacuumed and brushed out back of dryer unit Vacuumed and brushed out lint trap area Vacuum And dusted behind dryer unit Reconnected all vent piping, installing flexible, coupling from dryer to vent pipe secured with hose clamps, and silver tape Cleaned and polished outdoor termination kit Installed dryer back into closet- Plug power back into unit Vacuum and clean up 100% Run test dryer to confirm no leaks, and that exhaust is strong at termination- okay Venting is 100% clean, tested and operational View visual findings from