. Upon arrival filter is clean. Turned the heat on and went to indoor unit. The coil is clean. No signs of leaks. The blower housing is clean. The blower is spinning freely no signs of oil on motor. The blower motor amped within the manufacture specifications. The aux heat is currently working properly. The bars amped at 19.99 and 20.22. Both are within the manufacture specifications. Inspected low and high voltage wiring. All wiring and wiring connections are good and tight. None found damaged. Cleared the drain. Both primary and secondary safety switches are working properly. Went to outdoor unit. Coil is a little dirty so I sprayed it off. The compressor amped at 10.5 and the condenser fan motor amped at .82. The condenser fan motor is spinning freely and no signs of oil on motor. The capacitor checked out in range per manufacture. The contactor is clean and free of pitting or burn marks. Inspected low and high voltage wiring and wiring connections in outdoor unit. All wiring is go