During our inspection we started with rooftop unit one we started by taking out all the old filters and replacing them with new ones this roof top has 10 20 x 24 x 2 filters. The belts did not get changed this time. We then inspected all the coils we found that all the coils were clean at this time, but the condenser coils need to be combed because the fins are pushed in everywhere we quoted this up we then manually put it into a test mode heat and checked out first and second stage heating both igniters and both flame sensors are in good condition at this time, we did find that the inducer’s had capacitors they were 6 MFD the second stage inducer 6 MFD capacitor was good but the first stage six MFD capacitor was bad. I quoted this up I would like to, the blower wheel was clean in free debris. The belt was free of any damage or nicks in the shaft was in good condition we will have to grease the bearings. Next time we come out there was a wire that was burnt inside the electrical comp