. Upon arrival customer showed me the stat and indoor unit. Set the thermostat to heat. Went to indoor unit in the basement. Inspected evaporator coil. The coil is clean and free of debris. Leak searched the coil and didn’t find any leaks at this time. Inspected the blower housing and the blower motor. The blower housing is clean. The blower motor amped at 1.12. The blower is spinning freely. Inspected the electric heat strips. The electric heat strips amped at 21.54 and 20.99. Both are working properly. Inspected low and high voltage wiring. All wiring is good and tight. The surge protector is working properly. The drain is clear and the drain safeties are working properly. All visible duct work is good and tight. Went to outdoor unit. Tested the defrost cycle. The defrost is working properly at this time. The Refrigerant pressures were 135/455. This is in range. The compressor amped at 4.75. The condenser fan motor amped at .61. Both are within the range per manufacture specificati