Arrive to the home knocked on the front door and customer greeted me at the front door. Customer explained me that the system was only cutting on and off when it wanted to and then it was not coolong the home properly. She then showed me where the thermostat in the indoor unit were located. Customer has a one system home that is a Amana heat pump system Indoor unit Took an amp draw of indoor fan motor of 2.36 which is in range per manufacture specs. Check all high and low-voltage wiring and is in good shape at this time. Also check cleanliness of evaporator coil and blower wheel, both are clean and free of debris at this time. Checked condensate drain, drain is clean and free of debris at this time. Indoor unit is running properly this time. Outdoor unit One starting to outdoor unit noticed that it took a while for the compressor to get going and once I finally did going the system ran fine. I didn’t checked all low-voltage wiring outside for any kind of nicks or loose wiring co