. Upon arrival the filters are clean. Went to the attic. The coil is very rusted but couldn’t find any leaks at this time. The blower is clean. The blower motor amped within the manufacture specifications. The electric heaters amped within the manufacture specifications. Inspected all low and high voltage wiring. All wiring is good and intact at this time. The drain is clear. Went to outdoor unit. The Refrigerant pressures are 150/390. The compressor amped at 7.87. The fan motor amped at .92. Both are within the manufacture specifications. The capacitor checked out in range per manufacture specifications. The contactor is clean and free of pitting. The condenser coil is clean. Inspected all low and high voltage wiring. All wiring is good and tight. Basement furnace Cleaned flame sensor. Put it back. Fired the furnace up. The inducer motor amped within the manufacture specifications. The igniter is in good shape and working properly. The gas pressures were good. The blower motor amp