Arrived at customers residence and I was greeted by the customer and was led to the thermostat at this time.. and it is functioning properly at this time. Ins-ducted 20x2x1 filter and it is clean at this time.` Tape and duct work joints are tight and neat at this time and without any visible defects at this time. Inspected gas line into furnace and it is tight and neat and every joints and fitting is doped and tightened properly and without any visible defects at this time. Inspected manual shut off gas valve and it is functioning properly at this time.ins-extend condensate drain and it is clear and functioning properly at this time. inspected zoning control board and it is functioning properly at this time. Refrigerant lines are tight and neat and Arma flex insulation is intact and without any visible defects or issues at this time. Inspected inducer draft motor and it is functioning properly at this time. Inducer draft motor has an .6 amp draw at this time. Inspected blower motor