During our inspection today, we started with the basement system. The customer left us a note on the door stating to start with the system because she was not on the premises at the time. I took a picture of that note on the furnace. We noticed that it was dirty. We took out the blower housing with the motor and wheel and cleaned out the blower wheel and the inside of the cabinet. We also inspected the secondary heat exchanger while doing so. after doing all this, we check the rest of the system out all technical information is in the check sheet which I have emailed to the customer. We also found that the inducer motor for this furnace is going bad. The bearings inside or loose and that is making a bad noise. I showed the customer video of this and I am giving her the option to replace it. We then went over to the barn and inspected the mini split. We cleaned off the coil on the outdoor unit and everything on this is running fine as well. We did not do a check sheet on the system bec