View visual findings from this job here - https://visionshare.xoi.io/?id=XA-DE27-B44FC79017E24B5F883C3F06BEDEC90F Customer needs to have their HVAC system inspected: They had a power surge on the block that blew out all electrical in the customers home- The customer states that the house has been rewired and she would like to test the HVAC system At arrival found the thermostat with no display Check air handler in attic Open blower cabinet door Check voltage going to air handler - Only 120 V going to the system And the system is rated for 208/230 volts There is only 12 V coming out of the transformer and the fuse on the control board is blown Shut power to the air handler Replace the fuse on the control board with a new fuse Power needs to remain off to the system until a licensed electrician determines why the system is only receiving half of the voltage that it is required Check the outdoor condensing unit while on site and confirm system is holding pressure and there is 240 V a