View visual findings from this job here - https://visionshare.xoi.io/?id=XA-DE27-9852DB32796A4E7A9205687E072F6FC7 Perform maintenance on one Goodman, gas fired furnace: * Power down system at arrival * Open furnace and blower cabinet doors * Immediately noticed water dripping from the secondary heat exchanger on the furnace * Remove the flame sensor: Cleaned with copper bristle brush, and polished with steel wool * Remove the hot service igniter and inspected- okay condition * Secured Both components back in place * Vacuum and dusted out debris from furnace cabinet and components * Vacuum and dusted out debris from return box and blower cabinet and components * Replaced and dated 14 x 25 by one air filter * Clear, condensate drain line and trap and prime with freshwater * There is no neutralizer kit on this system, and this is a high efficiency furnace * Inspect Venting off of system- okay * Return power to equipment * Running and test heating: The furnace fires on his operating nor