Returned to removed old GWH and install new fixtures per homeowner’s request to do the work Thursday. Upon arrival I cut off the water at meter and drained the old GWH and started to put together the new GWH. Once it was prepared I started taking the new fixtures down to the basement and removed the old GWH and PRV. I then started with the PRV and main water shut off and removed the old gate valve and PRV and pressed it on the pipe. Once the old GWH was emptied I removed it and placed a new drip pan and then the GWH and attached the vent pipe with screws and tape. I connected the cold and hot water lines with copper pipe installed a mounting bracket and the new expansion tank. I then properly connected the pipes and proceeded to the last part which was to run approximately 10 ft of new trac pipe due to the old line being copper and not up to code. I installed it and new gas shut off and checked for leaks which non were found. I then turned on the water and everything works properly no
