Hose bib on back of house had slow leak running down the wall. After receiving approval to replace, we started taking apart the hose bib, found there was a solder connection on the hose bib that was barely attached and only being held in place by the screws in the wall. As soon as we took the screws out it fell off the side of the house. Had to cut drywall inside master bedroom closet. Pushed pex through the wall and installed new hose bib. Added an isolation valve inside the closet wall for the hose bib. Tested to ensure proper function and a leak free install. Left hose bib turn off and drained down as we are about to get below freezing temperatures for the next few days, wanted to prevent chance of it freezing. No further issue at this time.
