Customer agreed to fix a few of the issues that I wrote down and sent to him which includes two new hose bibs the gas pipe for the GWH and a few pipe repairs. I began with turning off the home water and installed a new whole home shut off and then removed the hose bib next to it and installed a new one with pex pipe. Once it was secured I moved to repair the leaking saddle valve which I removed cut the pipe and installed a repair coupling and pressed it. Then I proceeded to remove another saddle valve located above the GWH and did the same process removed it cut and installed a coupling g with a stop. Then I replaced the hose bib that is located on back side of home and installed a new bib using pex pipe and pex adapters. Once it was secured in I turned on the water and no leaks or issues were found and I tested both hose bibs and added caulk to outside and secured them to the wall with anchors. Finally I replaced the copper gas pipe for the GWH with 1/2 CSST pipe and used two adapters
