Repipe the hot&cold water line for the kitchen sink The water line coming from the crawl space is 1/2 in pipe then converts into 3/8 Will need to make all 1/2 pipe. The leak is coming from the service stop however the pipes are bent and I will not be able to reattach properly So for this job, we re-pipe the hot and cold water lines for the kitchen sink. The previous waterlines came in as 3/8 rather than half inch so therefore we installed new half inch pipe and pecks so we can feed it down into the crawlspace. make sure everything was crimped properly to ensure a leak free connection. There was a saddle valve on the copper pipe so therefore I added a quarter inch Shut off valve however I do not know what it goes to however, I did reconnect the valve on but kept the shut off valve off at this time. There are no leaks on any of the pipe connections. The pressure is at 120 and I advise the customer to replace the pressure reducing valve as soon as possible. The pressure being this high c
