For this job, we were called out to replace the pressure reducing valve. The customer already had a 25 AV, but it was installed about 1015 years ago the one that we went ahead and replaced it with was the same model turned off the water to the house let drain down the house as much as possible some residual water would still be in the line Disconnected. The union added a mail adapter to the new PRV and pro pressed the male adapter to the copper once that was complete there are no leaks tie. The union back on the customer is all good. Check the pressure it was reading at 60 pounds and then I asked the homeowner to flush the toilet and it dropped down to 40 pounds indicating a decrease in pressure so therefore that is why we did the recommendation on replacing the unit. No leaks after installed.
