Upon arrival customer stated there was water coming up from the floor. Informed the customer the water was coming from the sewage ejection pit. Gave customer estimate to pull the lid and pump. Customer approved estimate. After pulling the lid and pump I noticed the pump was clogged. I got the object out of the pump and put it back in the pit and plugged it back up and it did not turn back on. I informed the customer the pump would have to be replaced and also informed the customer that the check valve and ball valve were not tied in the correct way. Gave customer estimate to replace pump, check valve, and ball valve. Customer approved the estimate. I informed the customer I would have to return tomorrow morning to install the pump. Returned today to install new sewage ejection pump, check valve, and ball valve. I cut out old valve and check valve. I replaced the pump with the new pump and tied it in with the new check valve and ball valve. Tested system and system is working properl