Vern's plumbing was able to send a technician out quickly to fix our problem. The technician showed up during the time slot that they said they would arrive.
Overall Experience
Quality
Price
Convenience
Replace tmp on the water heater and flush the system out into water came out in the hand sink on the hot side in the faucet explain to the employer that the water heater is heating job is complete
Check everything on the basement and saw the tmp on the water heater started to leak so I talk to Jessica and she said to send a qoute to Todd and I turn the two valve for the water heater and also trun the braker off more the water heater for safety purposes
Installed new woodford frost free hose bib on the right side of the home near the garage door, new bib is working as it should at this time with no issues. Emailed copy of invoice to homeowners email.
Performed whole home plumbing inspection, emailed all recommendations to homeowners email. Homeowner needs to contact the company that installed the filtration units so they can give him all the information on the units and the service that needs to be done to them. Vern’s plumbing will not service them because we don’t work them. Homeowner will contact the office to discuss transferring his exiting membership to his new home. Water test results Hardness- 0 PH- 7.6 Iron- 0.2 TDS- 196
Attempted to locate issues with the upstairs classroom toilet Found when this toilet is turned on it is constantly running Technician initially assumed the solenoid was stuck open and not allowing the diaphragm to seal Removed wiring assembly to verify the solenoid, however with the retrofit style flush valve there is unfortunately not a way to replace the solenoid, they’re installed by manufacturer Replacing this flush valve handle would be the next best option Customer opted to remove the flush valve from another toilet upstairs and install on the classroom temporarily Todd would like to purchase another valve on his own and replace at a later date Mentioned I cannot warranty any of the parts being swapped around, if anything happens with them we would be happy to come by and replace/take another look
Breaking down of existing booster pump pump end and motor for the installation of a new pump end and reusing existing motor. Existing pump end / base is non repairable due to repair parts not offered anymore through manufacturer. Pump electric motor is still working as should and the only issue currently is the leaking pump end / base which can be replaced. For work to take place we will isolate electric booster pump and bypass so building still as water. Turning off of electrical power to pump, draining down piping and pump of water, separating motor from pump, installing new pump end / base and reinstalling existing motor. Restoring water to pump, bleeding of air within water piping and pump, restoring power to pump. testing work and pressure once completed. --- Pump end delivery eta is roughly 8-10 weeks.
Arrived to complete water treatment system installation and received additional approval to add new whole house filter housing. Completed all work, no leaks or issues. Completed system start up. Collected payment with American Express.
Ph of 7.5 Hardness of 21 iron is zero with a tds of 407. Will need to return next Monday April 29th for asp 2 1354 installation.
Completed installed and tested with no leaks at this time. Tested water for filtration/water treatment estimate. Home has 23 gpg of hardness and over 2 ppm of iron. Recommend Sanitizer Softener
Inspected original 1989 electric water heater located in unfinished portion of basement. Basement does have walk out doors unfinished side. Estimate approved to return Monday between 12 PM and 2 PM to install new 80 gallon electric water heater. Emily Lindsay will be there to let us in and make complete payment ahead of time before leaving for work. We will test all work and give confirmation text or phone call to confirm job has been complete and will lock up when done. New water heater replacement will include new L grade copper, piping, new shut off valve, new drain pan with water alarm and disposal of old unit. Need helper **
Replace the inside of the Sloan flush valves
First level Toilet #1 replace the spud and took out the toilet and replace the wax ring flush it couple of times to see any leak and no leak Found Second level Toilet #1 replace the vacuum breaker Toilet #6 tookmthe out out replace the wax ring Toilet #3 part are in order when part get to the shop going to call to reschedule to come back and fix it
Complete repair of the existing Elkay faucet in the classroom As well as attempt to resecure to sink Repaired Elkay faucet in classroom, replacement of hot and cold side cartridges, restored water and tested for leaks and any other issues with the faucet Customer had questions about a Koehler faucet in the first floor lobby restrooms and was interested in potentially rebuilding these faucets or replacing Told customer I could send pricing over for the sensor faucets, possibly only installing 1 or 2 just to test in the building and see if it’s well received
Complete repair of the existing Elkay faucet in the classroom As well as attempt to resecure to sink Installation of a new closet spud within the ADA toilet on the second floor womens restroom, pulled and reset same toilet after repair. Noticed water leaking from the base
Inspected issues with the upstairs women’s toilets and found two needing vacuum breakers, one needinf a diaphragm. And one needeinf a spud Installed two new vaccum breakers and tested for leaks The third stall from the door needed a vacuum breaker and a diaphragm as this toilet was constantly running, replaced both and found no further issues with this toilet Also looked at an Elkay hand sink faucet in the left hand classroom on the second floor This faucet is dripping on the cold side and should have a new cartridge installed When we replace these cartridges technician will attempt to resecure the existing faucet with the existing support brackets. Spoke with Todd about reminding estimates and told him to call the shop or me at any time for any questions regarding the estimates 540-439-6544 (shop) 540-325-3525 (nathan)