Arrived at location on 8/11/21 - Wash pump not running. Pulled top cover off. Found overload tripped, reset overload. Drained tanks, inspected wash pump intake, nothing jammed, able to turn motor by hand. There was a measuring spoon and spoon inside tank, but not jammed inside motor impeller. Did turn impeller by hand a few times, did also start to spin more freely. Likely something minor gumming up impeller on motor. Run unit, started running at 9 amps, then after a minute got down to 4.5 amps, proper running load of wash pump motor. Run several times, amping correctly. Reassemble. Ok for use.