found unit with bad start cap. Purchased new cap and installed. Energized unit, found potential relay not dropping out, need to replace. - Installed relay and cleaned condenser coil. Energized unit, checked coil and relay operation, allowed unit to run. Found low suction pressure. Recovered refrigerant, repaired leak at suction line. charged unit, unit now tripping on overload. Overload is weak and needs replaced. After further inspection, found relay not opening after compressor starts. Compressor may be bad, need to speak with Copeland. -- Recovered refrigerant, and replaced compressor and start components. Pulled vacuum, wired compressor, charged unit and checked operation. Unit is running normally at this time. Temp at 25*F and dropping