Have any feedback for us? We'd love to hear it! Call us at (610) 595-9072 and let us know how we are doing.
Reclaimed and removed old equipment. Installed new leveled pad, disconnect, whip, and new lineset. Placed new Amana condenser on pad and brazed in lineset with nitrogen. Wired in high and low volt connections. Installed new Amana high efficiency gas furnace and evaporator coil. Installed new April aire filter and supply plenum and sealed. Installed new humdifier. Ran new vents to exterior of home and tied into furnace. Brazed in coil with nitrogen and pressure tested to 300 psi then evacuated down to 129 microns. Installed new ez trap and condensate pump. Ran vinyl tubing to discharge line. Wired safety’s to break r. Reconnected gas and leak checked. Installed new switch and receptacle. Wired all high and low volt connections. Installed horizontal drain kit on intake vent. Tested operation in heating and cooling. Adjusted refrigerant charge and adjusted gas pressures. Performed combustion test. System working great at time of install.