Have any feedback for us? We'd love to hear it! Call us at (610) 595-9072 and let us know how we are doing.
Performed Precision Heating Tune Up on Rheem Gas Fired Furnace. Replaced 16x25x1 Air Filter. While inspecting Electrical Components, found Blower Motor Capacitor was testing below the rated level. Also found Ignitor is beginning to show signs of wear and deterioration. Performed Smoke Test and Visual Inspection of Heat Exchanger. Cleaned Burners and performed Combustion Analysis on Furnace. Draft Inducer Motor is running at higher than recommended Amp Readings. The Motor is rated for 1.35 Amps and is measuring at 1.45 Amps. Also found Pressure Switch Tubing is starting to become Dry and worn. The Gas Furnace/AC system is about 29 Years old. Due to the age of the system and the overall condition, replacement is recommended. Visually inspected Hot Water Heater after speaking with Homeowner about issue. Found a heavy amount of Corrosion around the Pressure Relief Valve. There is a small amount of water dripping from the Corrosion on the Valve. Recommend replacement of the Pressure Relie