Have any feedback for us? We'd love to hear it! Call us at (610) 595-9072 and let us know how we are doing.
Performed Precision Heating Tune Up on Gas Fired Furnace. Replaced 16x20x1 Air Filter. While testing electrical components, found Blower Capacitor testing below rating. Replaced Blower Capacitor and tested operation. Cleaned Pressure switch tubing which was blocked with buildup. Inspected Heat Exchanger and Burner Assembly. Put system in Heating Mode and Measured Amp Draw on Inducer Motor and performed Combustion Analysis of Furnace. Combustion readings were within standards and Air Temperature readings were within standards. During tune up noted that on the Gas Line there is an Union Fitting inside of the Furnace Cabinet. Would recommend repiping the Gas Line to remove this fitting from inside the Furnace as these fittings may leak, which would be a major safety issue. Tested fitting with leak solution and found no leaks at this time. Also found old Humidifier had been abandoned. Would recommend either removing and sealing the duct work or replacing with a new Humidifier. The old hu