3/6/24 Sent out today to Doug and Stacey’s for their membership plumbing inspection. Upon arrival I was greeted by Doug who I went over the purpose of today’s visit with and answered any initial questions to help set expectations. Doug opted to have the water heater drained on today’s visit. Vitals: -Total Dissolved Solids: 243 ppm -Water Pressure Static: 70 psi -Water Pressure Faucet Open: 60 psi (10 lb swing no Pressure Regulator) -Water Temp Setting: 110-120F -Water Temp Output: 132F -Water Hardness: 9 grains of calcium per gallon (hard water, no filter or softener) -Water Heater: Rudd, 2018 gas, expansion tank, 1/4 turn shutoffs (installed by LBA) -Water Lines: pex and copper -Drain Lines: pvc Wear and Tear -expansion tank has failed (no pressure regulator) -master and hallway bathroom silicone is breaking down Solutions: -install new expansion tank with pressure regulator to protect the equipment -rebuild or replace toilets with silicone deterioration After reviewing the en