Arrived to perform previously diagnosed repairs. Upon inspection of the system, found that the unit was running a heat cycle. Let system finish its heat cycle. Opened up the furnace and moved any components that are in the way of the inducer. Removed the inducer and dried up any condensation that might be coming from the flue. Removed the gasket sealing the inducer to the collector box. Cleaned up the surface and applied gasket material. Allowed gasket material time to tack up and installed the inducer. Allowed additional time for the gasket material to cure. Performed final tightening on inducer mounting screws. Allowed system to run a full heat cycle and checked for leaks. System is functioning properly at this time