Climate Plus is always responsive and thorough. We have used them for both installation and service (both routine and emergency) and they always do an excellent job.
Response from Climate Plus, LLC:
Thank you for your wonderful review Catherine! We're delighted to hear that you've consistently experienced excellent service from Climate Plus. Being responsive and thorough in both routine and emergency HVAC services is our top priority. Whether it’s an installation or maintenance, we strive to provide the best for our customers in Cedar Grove, New Jersey. If you ever need anything, we're here to help. Best Regards, Joe
Overall Experience
Quality
Price
Convenience
Jack and Steve did a great job
Response from Climate Plus, LLC:
We're glad to hear that Jack and Steve did a great job. If you ever need anything, we're here to help.
Overall Experience
Quality
Price
Convenience
Jack was very professional and informed us of a potential problem we might encounter. He went out to get the part to fix the issue.
Response from Climate Plus, LLC:
We count ourselves lucky for customers like you and look forward to working with you again in the future!
Overall Experience
Quality
Price
Convenience
Arrived onsite for condensate leak. Homeowner mentioned it leaked last year too. Homeowner vacuumed emergency drain pan. I cleaned the condensate trap. Used CO2 cartridge to blow air through the primary and secondary drain line. Pour water in the evaporator coil drain and observed proper drainage. Upon testing the emergency drain pan found a hole in the pan. Used silicon to seal the hole. Homeowner will contact us if silicone doesn’t hold. Recommend annual maintenance.
arrived on site for installation of two kick space heaters in summit new jersey. Iupom arrival we were directed to the are were the units were being installed, customer confirmed this was their desire. disconnect all electrical before the units were mounted to code and wired according to the manual. soldered and processed the heater in kitchen aswell as the heater in laundry room. tested for leaks and found no leaks . tested all functions and purged system. everything is operational at this time
Air duct cleaning refers to the removal of dust and contaminants within the ductwork.
Air duct cleaning refers to the removal of dust and contaminants within the ductwork.
Preformed maintenance on amana Ac unit. Checked filter, filter is due, customer did not have one on site. They know/have changed filter before. Inserted temperature probes into unit duct work, close as possible. Went outside. Washed down condenser with chemical and water.
Air duct cleaning refers to the removal of dust and contaminants within the ductwork.
Greeted customer upon arrival Period Customer LED me to Air handler, thermostat, and condenser. Went outside to see the condenser turns on and it does. Set thermostat to Cooling. Disconnected the condenser from the disconnect box. Lean condenser from inside out. Use chemical and water to clean condenser. Plug disconnected back into power on the condenser, the condenser did not turn on. Issues with Generac box. Troubleshoot the situation, contactor in Generac box is bad. Hardwire the disconnect box directly to the condenser, generic box isn't connected to anything. Condenser turned back on check precious with field pieces check temperature split, temperature split Peak at 18° difference. All readings on pressure were fine except subcooling. Subcooling was at 1.6 Max. Inform the customer about the unit needing to be recharged, customer rejected and is aware about the unit status and information. Customer acknowledge and signed off.
Arrived onsite for water leak. Found pinhole leak in the copper condensate line. Used vinyl hose and hose clamps to stop the leak. The copper is older and maybe loosing its firmness. If problem persist may have to look at an alternate solution.
Arrived onsite for ac maintenance on 2 units. Asked customer to turn AC on to confirm operation. Chemically Cleaned both outside coils.
Arrived onsite forr no heat service call. Found the system off. Tried starting it but found faultnin the combustion and ignition safety system. Provided options to the homeowner. She selected Silver repair. Preformed repair including an burner cleaning and combustion analysis test. System flue exhaust pipe is onthe hotter side but within specifications. The carbon monoxide is 30ppm this is within the safe range but it bordering on high. Note the blower wheel or motor is making some noise but functional. System is operational but recommend replacing due to age and condition.
Arrived onsite to fix fault in flame safety system. Removed faulty part and installed new part, confirmed operation of the system.
Arrived onsite for water leak. Found pinhole leak in the copper condensate line. Used vinyl hose and hose clamps to stop the leak. The copper is older and maybe loosing its firmness. If problem persist may have to look at an alternate solution.
Arrived onsite for heating maintenance 2 gas fired furnace 1 in basement and 1 in the attic. Attic Furnace unit: Ask customer to turn heat on and confirmed operation. Changed filter. Brushed and Wiped down furnace blower cabinet and gas burners. Burners fired and are in good working order. No visual impingement detected. Checked electrical. Cleared condensate lines. Cleaned the flame sensor. However the flame sensor has carbon build up and browning. Recommend replacing. Will provide an estimate. System is operating as it should. Basement Furnace unit: Ask customer to turn heat on and confirmed operation. Changed filter. Brushed and Wiped down furnace blower cabinet and gas burners. Burners fired and are in good working order. No visual impingement detected. Checked electrical. Cleared condensate lines. Cleaned the flame sensor. Will provide an estimate. System is operating as it should.
Arrived onsite for heating maintenance gas fired furnace located in basement. Basement Furnace unit: Ask customer to turn heat on and confirmed operation. Changed Aprilaire 210 filter provided by homeowner. Confirmed operation of humidifier. Brushed and Wiped down furnace blower cabinet and gas burners. Burners fired and are in good working order. No visual impingement detected. Checked electrical. Cleaned the flame sensor. Measured heat rise at 52 degrees. System is operating as it should.
Arrived onsite for heating maintenance 2 gas fired High Efficiency furnaces located in the basement. 2nd Furnace unit: Ask customer to turn heat on and confirmed operation. Changed polarized filter provided by the homeowner. Turned on humidifier and changed water panel 45 provided by climate plus. Brushed and Wiped down furnace blower cabinet and gas burners. Burners fired and are in good working order. No visual impingement detected. Blew out condensate line. Checked electrical. Cleaned the flame sensor. Measured heat rise at 52. System is operating as it should.
